Archive for the ‘Signaling Servers’ Category

Issue: IP Phone experiences one-way speech path between the IP Phone and a TDM resource (such as a digital phone, T1 or voicemail) Environment CS1000 4.5 MC32 [voxfooter type="opssolution" for="1081"]
Issue: Power outage All systems reboot T1s are enabled and channels are IDLE CallPilot ports are IDLE Media Cards are IDLE IP Phone to IP Phone works, but attemps to call PSTN or CallPilot fail with re-order Environment: CS1000 CallPilot [voxfooter type="opssolution" for="1080"]
[download id=73] [voxfooter type="opsinfo" for="Daylight Savings Time"]
Issue: Audio issues with Media Gateway Controller or IP Lineside Environment: CS1000 MGC IPL Element Manager Solution: Please open a ticket using the VOX Service Request portal and request solution 1055. If you are not already a customer, please contact us and request to be set up as a customer so that you can request solution 1055.
Issue: Headset type on 1150 IP set not stored after reboot Environment: CS1000 4.5 IP Lineside 4.50.88 Signaling Server 4.50.88 Solution: Please open a ticket using the VOX Service Request portal and request solution 1050. If you are not already a customer, please contact us and request to be set up as a customer so that you can ...
VOX is pleased to announce that Nortel has released a product bulletin revision for Unistim 3.0 which includes instructions on how to reset a Nortel IP Phone using Unistim 3.0 firmware to factory default settings. For more information, download the product bulletin: [download id=11] This product bulletin describes the features of Nortel IP ...

Need more information about Nortel VoIP?

Wednesday, July 2nd, 2008
In response to customer questions about Nortel VoIP documentation and settings, we have generated solution 1041.  If you wish to get more information about Nortel VoIP, please open a ticket using the VOX Service Request portal and request solution 1041. If you are not already a customer, please contact us and request to be ...
This document [NN48500-543] was created to provide a common reference guide for the Command Line Interface of the Signaling Server TPS in a Communication Server 1000 network. Commands that are associated to a specific release are noted. This document is intended as a reference guide only and does not replace ...